Page 11 - HVAC
P. 11
HOW A DEHUMIDIFIER WORKS
1. Air is drawn into the unit by a fan 6. Air passes back into room 2°C CONDENSER EVAPORATOR
warmer and considerably dryer
2. Air passes over a cold surface WARM FAN MOIST
7. Defrost system automatically AIR AIR
3. As the air is cooled, it’s moisture de-ices unit as necessary
condenses CAPILLIARY WATER
8. Unit switches off automatically TUBE
4. Water falls into the container when container is full
COMPRESSOR
5. Air is re-heated by the heat 9. When the unit achieves the REFRIGERANT
recovery system selected level of dryness it
switches off automatically
Applications CS90-E CS90-H Applications CS90-E CS90-H
Model No. 10590GE-US 10590GH-US Model No. 10590GE-US 10590GH-US
Offices Bars
4 4 Museums 4 4
Laboratories Locker Rooms 4 4
Apartments 4 4 Computer Rooms 4 4
Storage Areas 4 4 Basements 4 4
Restaurants 4 4 4 4
4 4
Proven Performance The Problem
The EIPL CS90 dehumidifier is a stand alone solution to Excess humidity in your crawl space, warehouse, office,
your humidity problem. The unit is supplied with a internal factory or shop results in corrosion, mold growth and
electronic humidistat, extra long power cord and integral rotting. Enormous costs are incurred every year through
high lift condensate pump. This preassembly makes damage to inventory and through inflated building
the installation process simplistic, thereby reducing the maintenance costs as a result of dampness. Even if your
overall installation and project cost. The high efficiency building seems dry during the day, at night when the
Rotary compressor ensures the maximum extraction temperature falls, the humidity rises and the condensation
with the lowest running costs. The rubber anti-vibration process begins. The compact physical size and high
feet ensure any vibration is kept to a minimum and not performance makes the CS90 the ideal choice for areas
transmitted to / from the unit. which require humidity control.
The Dehumidifier
EIPL dehumidifiers are effective solutions to environmental control problems. The CS range of units
are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the
air through the refrigeration process. The fan draws the moist air through the cold evaporator coil,
which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the
condensate tray. The cooled air then passes through the hot condenser coil where it is reheated
using the same energy removed during the cooling phase, plus the additional heat generated
by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher
temperature with a lower absolute humidity than that which entered. Continuous circulation
of air through the dehumidifier gradually reduces the relative humidity within the area.
Because the CS ranges of units are equipped with an internal electonic humidistat, they
automatically switch on and off to save energy and expense by maintaining the desired
level of humidity with intermittent operation.
The small compact size of the CS90 products, and remote monitoring feature
(via a smartphone app) of the CS90-E, make the unit and the ideal choice
for installations where access is limited i.e. loft installations, crawl
spaces etc.
Ebac Industrial Products Incorporated
Virgina Office :- 700 Thimble Shoals Blvd. Suite 109, Newport News, VA 23606-2575
California Office :- 2060 Chicago Ave, Suite C7, Riverside. CA 92507
Tel: (855) 873-6800 Fax: (757) 873-3632 www.ebacusa.com