Page 3 - HVAC
P. 3
HOW A DEHUMIDIFIER WORKS
1. Air is drawn into the unit by a fan 6. Air passes back into room 2°C CONDENSER EVAPORATOR
warmer and considerably dryer
2. Air passes over a cold surface WARM MOIST
7. Defrost system automatically AIR FAN AIR
3. As the air is cooled, it’s moisture de-ices unit as necessary
condenses CAPILLIARY WATER
8. Unit switches off automatically TUBE
4. Water falls into the container when container is full
COMPRESSOR
5. Air is re-heated by the heat 9. When the unit achieves the
recovery system selected level of dryness it REFRIGERANT
switches off automatically
Applications CD30 CD30E Applications CD30 CD30E
Model No. 1133500 1139550 Model No. 1133500 1139550
Crawl Spaces Oil Rigs
Warehouse - Agriculture
Basements Kitchens -
Factories Pumping Stations -
Water Damage Restoration Hotel / Motel
Sports Halls - Stadiums -
Storage Areas - Ships / Barges
Laboratories -
PROVEN PERFORMANCE THE PROBLEM
Under the operating conditions of 80°F and 60% Relative Excess humidity in your crawl space, warehouse, office
Humidity (AHAM standard, baseline used to compare factory or shop results in corrosion, mold growth and rotting.
the performance of industrial dehumidifiers), the CD30 / Enormous costs are incurred every year through damage to
inventory and through inflated building maintenance costs as
CD30E units will remove more than 17 pints of harmful a result of dampness. Even if your building seems dry during
water vapor each day, additionally, nearly 4 gallons the day, at night when the temperature falls the humidity rises
per day can be efficiently removed in an extreme and the condensation process begins. The compact physical
size, and high performance, makes the CD30 family the ideal
environment. choice for home owners with crawl spaces.
The CD30 / CD30E units are definitely not “another
pretty face” but tough, self sufficient performers
THE DEHUMIDIFIER
EIPL dehumidifiers are effective solutions to environmental control problems. The CD ranges of units are high
capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the
refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air
below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray,
which is equipped with an internal condensate pump for easy removal of collected moisture.
The cooled air then passes through the hot condenser coil where it is reheated using
the same energy removed during the cooling phase, plus the additional heat generated
by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly
higher temperature with a lower absolute humidity than that which entered. Continuous
circulation of air through the dehumidifier gradually reduces the relative humidity
within the area. Because the CD ranges of units are equipped with an internal
humidistat, they automatically switch on and off to save energy and expense by
maintaining the desired level of humidity with intermittent operation.
The additional features of the CD30E make the unit the ideal choice for
installations where remote monitoring is required. The alarm humidistat
can be adjusted and preset during the installation process and will
provide means of identifying a high humidity condition. This
unit is also supplied complete with a wall mount
bracket and installation kit.
Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: (757) 873-6800 Fax: (757) 873-3632 www.ebacusa.com