Page 2 - Lumber
P. 2

SPECIFICATIONS                                                                                   LD800 WOOD DRYER

SPECIFICATION                   24” (600mm)
Height:                         13 ½” (340mm)
Width:                          22” (550mm)
Depth:                          82lbs. (37kg)
Weight:                         460CFM (800m³/hr)
Airflow:                        320W (Max)
Power Rating (Dryer):           350 (Operates Intermittently)
Power Rating (Heater):          115V / 60Hz-7 amps
Power Requirements:             113˚F (45˚C)
Maximum Operating Temperature:  STC1 Controller (Supplied)
Control                         Epoxy / Vinyl
Finish                          Stainless steel water collection tray for corrosion resistance.
Special Features
                                Drying chamber temperature indicator.

                                Powerful centrifugal fan for even drying.

OPTIMUM CAPACITY

The EIPL LD800 has been designed to dry the following maximum wood loads:

1” Hardwood    800BF             (66 cu ft)
2” Hardwood  1,750BF            (146 cu ft)
3” Hardwood  2,900BF            (246 cu ft)

1” Softwood    320BF             (26 cu ft)
2” Softwood    700BF             (58 cu ft)
3” Softwood  1,170BF             (98 cu ft)

PACKAGED SYSTEMS

The LD800 with the STC1 Controller is all you
need to start drying wood. The STC1 controller
consists of a proportional timer to control the
drying cycle and a thermostat to control the
heating cycle. Extra equipment such as venting
units and supplementary heaters are normally
not required. The drying speed is controlled at
a rate which will not cause degrade, therefore
humidification equipment is unnecessary.

                                                 PRECISION DRYING THROUGH DEHUMIDIFICATION
   1   2   3   4   5   6   7