Search
 
Brochures Quote/Order
 
PAC20
Description
The PAC20 consists of 2 independent cooling units housed in sealed compartments, with air inlets and outlets at either end of the unit. The greatest temperature drop, from ambient air, will be achieved with both units switched on. The PAC20 also incorporates 2 independent 1.6Kw heater banks, housed in the sealed compartments. The greatest temperature rise, from ambient air, will be achieved with both units on.

The ACU is supplied with 2 x 5m insulated hoses, associated couplers, lifting poles, and a jerrycan to collect excess water produced by the operation of the ACU, a 25m power lead and this set of operating instructions.

The power requirement for the ACU is 220/240v 1ph 50Hz connected to a MINIMUM 30A power circuit.

In a NBC mode of operation, the ACU is capable of being used with the following configurations.

Operation
The PAC20 is designed to operate as a stand alone packaged air conditioning unit, delivering cool air via insulated flexible ducting. Alternatively it can be used in a NBC mode of operation, to provide cooled or warm air downstream of attached Air Filtration Units (AFU) into a Porton or Winterbourne Liner.
The unit is of a robust construction and fitted with a wrap round skid and lifting points.