Page 13 - HVAC
P. 13
HOW A DEHUMIDIFIER WORKS
1. Air is drawn into the unit by a fan 6. Air passes back into room 2°C CONDENSER EVAPORATOR
warmer and considerably dryer
2. Air passes over a cold surface WARM MOIST
7. Defrost system automatically AIR FAN AIR
3. As the air is cooled, it’s moisture de-ices unit as necessary
condenses CAPILLIARY WATER
8. Unit switches off automatically TUBE
4. Water falls into the container when container is full
COMPRESSOR
5. Air is re-heated by the heat 9. When the unit achieves the
recovery system selected level of dryness it REFRIGERANT
switches off automatically
Applications CD60 Applications CD60
10264FR-US 10264FR-US
Model No. Model No.
Offices Bars
Laboratories Museums
Apartments Locker Rooms
Storage Areas Computer Rooms
Restaurants Basements
PROVEN PERFORMANCE THE PROBLEM
The EIPL CD60 dehumidifier is a stand alone solution to Excess humidity in your crawl space, warehouse, office,
your humidity problem. The unit is supplied with a pre- factory or shop results in corrosion, mold growth and
wired, remote humidistat, extra long power cord and rotting. Enormous costs are incurred every year through
damage to inventory and through inflated building
long condensate tube. This preassembly makes the maintenance costs as a result of dampness. Even if your
installation process simplistic, thereby reducing the building seems dry during the day, at night when the
overall installation and project cost. The high efficiency temperature falls the humidity rises and the condensation
process begins. The compact physical size and high
Rotary compressor ensures the maximum extraction performance, makes the CD60 is the ideal choice for
with the lowest running costs. Fully adjustable areas which require humidity control.
feet ensure the unit can be leveled quickly and
accurately.
THE DEHUMIDIFIER
EIPL dehumidifiers are effective solutions to environmental control problems. The CD ranges of units
are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air
through the refrigeration process. The fan draws the moist air through the cold evaporator coil, which
cools the air below its dew point. Moisture forms on the evaporator coil and is
collected in the condensate tray, which is equipped with an internal condensate
pump for easy removal of collected moisture. The cooled air then passes through
the hot condenser coil where it is reheated using the same energy removed during
the cooling phase, plus the additional heat generated by the compressor. The air
is, therefore, discharged from the dehumidifier at a slightly higher temperature with
a lower absolute humidity than that which entered. Continuous circulation of air
through the dehumidifier gradually reduces the relative humidity within the area.
Because the CD ranges of units are equipped with an internal humidistat, they
automatically switch on and off to save energy and expense by maintaining the
desired level of humidity with intermittent operation.
The additional features of the CD60 make the unit the ideal choice for
installations where remote humidistat mounting is required. The
high capacity condensate pump ensures the unit is capable
of pumping water from basements or to higher
drainage points.
Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite 109, Newport News, VA 23606-2575
Tel: (757) 873-6800 Fax: (757) 873-3632 www.ebacusa.com