DD1200

Desiccant Dehumidifiers

Voltage Requirements :
220 / 460
Typical Extraction :
562 ppd
DD900

• Adjustable thermostat
• Air Filter
• High Capacity EC Fan
• Energy Efficient Heaters

Dehumidifiers are required wherever there is a need to  lower the humidity level to prevent corrosion, mould growth and condensation or  maintain a low humidity condition during manufacture, packaging or storing of hygroscopic products.

DD1200 220V DD1200 460V
Part Number 10540GR-US 10541GR-US
Height (in) 56 56
Width (in) 28 28
Depth (in) 23 23
Weight(lbs) 200 200
Voltage 220 460
Phase 3 3
Frequency (Hz) 60 60
Power (kW) 11.8 11.8
Process Airflow Maximum - Dry Air (cfm) 883 883
Process Airflow - Dry Air (cfm) 705 705
Regen Airflow - Wet Air (cfm) 195 195
Process Air Duct Size (in) 8 8
Regen Air Duct Size (in) 6 6
Rotor Wheel Speed (rph) 13.6 13.6
High Extraction Setting @ 27°C 60% (ppd) 562 562
High Efficiency Setting @ 27°C 60% (ppd) 402 402
Deep Drying Settings @ 27°C 60% (ppd) 508 508
Typical Dry Air Off – High Extraction Setting (%) 9 9
Typical Dry Air Off – High Efficiency Setting (%) 12 12
Typical Dry Air Off – Deep Drying Settings (%) 5 5
Min Operating Temp (°F) -4 -4
Max Operating Temp (°F) 104 104
DD1200 220V DD1200 460V
Part Number 10540GR-US 10541GR-US
On/Off Control Y Y
Adjustable Thermostat Y Y
Electronic Controls Y Y
Manual / Automatic Mode Selection Y Y
Remote Humidity Sensor Facility Y Y
Hours Run Meter Y Y
EC High Efficency Fans Y Y
Variable Fan Speeds Y Y
High Capacity PTC Heaters Y Y
Process / Regen Air Filter Y Y
Rubber Anti-Vibration Feet Y Y
Dual Air Inlet Design Y Y
Free Standing Y Y
Status Indicators Y Y
Self Contained Y Y
Stainless Steel Construction O O
Inlet Duct Attachments O O
High Temperature Safety Cut-outs Y Y
Part Number Description
3035157 Rotary Humidistat
3035160 Humidistat with Internal Sensor
3035162 Humidistat with External Sensor
DD1200 220V

1x DD1200 220V Desiccant Dehumidifier
1x DD1200 220V Owners Manual
1x Free Plug

DD1200 460V

1x DD1200 460V Desiccant Dehumidifier
1x DD1200 460V Owners Manual
1x Free Plug

Methods of Dehumidification

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel  impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air, is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates a small  portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream, this hot wet air is then exhausted outside the area being dried.

Why Choose EIPL?

EIPL is Europe’s leading manufacturer of dehumidifiers and is a name you can rely on. No matter how extreme the conditions EIPL’s efficiency copes comfortably even at the coldest temperatures.

Rugged Construction & Years of Service

Over thirty seven years of development experience means you can rely on the proven track record of the EIP range of dehumidifiers. Every dehumidifier is designed for efficiency and ruggedness, and built to last. The popularity of EIP Ltd’s dehumidifiers with the plant hire trade speaks for their reliability, portability and outstanding durability.

DD1200

The DD1200 desiccant dehumidifier is an upright, compact design, which makes it easily accommodated within space restricted areas. The unit incorporates a PTC Heater ensuring maximum drying is immediately reached, and constantly maintained while the unit is running. The DD1200 incorporates two EC fans with variable speed allowing the unit to be easily installed and commissioned in a wide range of applications.

An electronic thermostat allows and fully variable EC fans, allows the user to select the desired drying preference , ie High Efficiency, Deep Drying, or High Extraction.

The following table provides an example of capacities

27°C 60% - EXAMPLE SETTINGS
High Extraction High Efficency Deep Drying
Process Airflow (m3/hr) 1400 1200 1000
Regen Airflow (m3/hr) 400 330 400
Regen Temperature Rise (K) 110 90 110
Extraction (l/d) 266 190 241
Dry Air Off (%) 9 12 5

Facility for an external humidistat allows the humidity level to be maintained at a preset condition. The EIPL range of desiccant dehumidifiers incorporate a rotors with a 82% active Silica Gel, thereby ensuring optimum performance over the equipments wide operating range

Request a quote…

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.