Orion

Cleaning & Restoration

Voltage Requirements :
115/1/60
Effective Volume :
914 m3
Typical Extraction :
105 ppd
Kompact

• High Capacity.
• High efficiency, Low Amp Draw RotaryCompressor.
• 2 stage air cooling with “Air to Air” heat exchange.
• High Static Backward Curved Fan.
• Extra long power cord complete with a GFI Plug.
• Temperature Sensitive Defrost control for optimum performance.
• Effective, reverse cycle defrosting feature which automatically melts away frost buildup providing effective operation at low ambient temperatures.
• Rugged, epoxy powder-coated steel chassis and housing.
• Washable Air Filter.
• Integral Condensate Pump with Purge Feature.

Orion
Part Number 11270GR-US
Height (inch) 44
Width (inch) 24
Depth (inch) 22
Weight(lbs) 165
Voltage 115
Phase 1
Frequency(Hz) 60
Power(W) 900
Current(A) 8
Airflow(m3/hr) 914
Noise Level(dba) 57
Refrigerant R454c
Effective Volume(m3) 237
Typical Extraction (ppd) 105
Min Operating Temp (°F) 33
Max OperatingTemp (°F) 105
Orion
Part Number11270GR-US
On / Off ControlY
Temperature Sensitive Defrost ControlY
Reverse Cycle Defrost SystemY
Hours Run MeterY
Low Amp DrawY
Integral Condensate PumpY
Pump Purge SwitchY
2 Stage CoolingY
Washable FilterY
Washable Air FilterY
Fitted Mains GFI PlugY
Quite OperationY
Compressor TypeRotary
Quick Release Hose CouplingY
25’ Length of PVC Drain HoseY
25’ Length Power CordY
Power Cord WrapsY
Rugged WheelsY
Epoxy Powder CoatingY
Orion

1x Orion Dehumidifier
1x Orion Owner’s Manual
1x 3/8" PVC Tube I/D – 7.8M long
1x Quick Release Hose Coupling

How a Dehumidifier Works

1. Air is drawn into the  unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture condenses
4. Water falls into the container
5. Air is re-heated by the heat recovery system
6. Air passes back into room 2°C warmer and considerably dryer
7. Defrost system automatically  de-ices unit as necessary
8. Unit switches off automatically when container is full
9. When the unit achieves the selected level of dryness it switches off automatically

Application

The EIPL Orion Professional Dehumidifier is the ideal unit for commercial work. Its compact size permits one man operation, yet has the capacity to handle several room-size areas at a time.

Best of all it’s affordably priced within the budget of most restoration specialists

Proven Performance

The EIPL Orion Dehumidifier is a rugged, yet mobile, piece of equipment that will operate under extreme conditions and pull large amounts of moisture from the air. The Orion incorporates an “Air To Air” Heat Exchange which provides a secondary level of pre-cooling.The high capacity backward curved fan will maximize air delivery overlong distances. Whenever there is a need for fast dependable, energy efficient drying, EIPL can provide the answer. The high efficiency Rotary compressor ensures the maximum extraction with the lowest running costs.

The Problem

EIPL is a recognized world wide supplier of flood restoration drying equipment. We offer a variety of dehumidifiers and air movers to remove water and assist with drying areas after water damage.Following a flood, whether it is in your basement or office, it’s vitally important to restore the damaged area to good order as soon as possible to protect your health from microorganisms, mold and bacteria that may grow and ultimately prevent further damage.Whether it is a flash flood, hurricane, heavy rains or water main break, EIPL has the equipment to handle the harshest environments and assist with proper restoration.

The Dehumidifier

EIPL dehumidifiers are effective solutions to environmental control problems. The Orion dehumidifier, with its 2 stage cooling process and temperature sensitive defrost control, ensures optimum performance throughout the unit’s full operating temperature range.

Moisture is removed from the air through an efficient refrigeration process. The fan draws the moist air through and “Air to Air” heat exchanger, where the incoming air is pre-cooled. The air is then drawn through the evaporator coil which further cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered.

Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area.

Request a quote…

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.