SPP6A

Dehumidifiers

Power Requirements :
110 / 1 / 60
Typical Extraction :
11 ppd

• Concealed Control Humidistat
• Pre-set High RH Humidistat (60%)
• Remote Indicator Panel
• Free Standing, Collapsible Stand
• Convenient Drain Point For Condensate Hose
• Epoxy Powder Coated Steel Construction
• EIP’s Unique Hot Gas Temperature SensativeDefrost
• Rugged Millitary Style Handles
• Adjustable Tilt Guides For Uneven Floors
• Totally Enclosed Coils

SPP6A
Part Number 11398GY-US
Height (inch) 10
Width (inch) 11.8
Depth (inch) 18.5
Weight(lbs) 55
Voltage 110
Phase 1
Frequency(Hz) 60
Power(kW) 0.51
Current(A) 5
Airflow(cfm) 247
Noise Level(dba) 52
Effective Volume(ft3) 3000
Typical Extraction(ppd) 11
Min Operating Temp (°F) 33
Max OperatingTemp (°F) 131
SPP6A
Part Number 1135700
On/Off Control Via Humdistat Y
Adjustable Control Humidistat Y
Preset “High RH” Humidistat (60%) Y
Collapsible Stand Y
Temperature Sensative Deforst Y
Fitted Mains Plug Y
Free Standing Y
Electronic Thermostat Defrost Control Y
Compressor Type Reciprocating
Gravity Permanent Drain Facility Y
HotGas Defrost System Y
Rubber Anti Vibration Feet Y
Rugged Caying Handles Y
Remote Indicator Box Y
Drying Indicator Y
High RH Indicator Y
Epoxy Powder Coated Chassis Y
10ft Length Of 1/2 I/D PVC Tubing Y
SPP6A

1x Owner’s Manual
1x Dehumidifier Stand
1x Indicator Box
1x Jubilee Clip
1x PVC Tube–12mm I/D–3M long
1x Spanner

How a Dehumidifier Works

1. Air is drawn into the  unit by a fan
2. Air passes over a cold surface
3. As the air is cooled, it’s moisture condenses
4. Water falls into the container
5. Air is re-heated by the heat recovery system
6. Air passes back into room 2°C warmer and considerably dryer
7. Defrost system automatically  de-ices unit as necessary
8. Unit switches off automatically when container is full
9. When the unit achieves the selected level of dryness it switches off automatically

Application

The EIPL SPP6A portable dehumidifier has been designed to be used over a widetemperature range, and combines lightness, compcatness with high reliability.Originally designed to be extensively used in container bodies, where sensative equipmentis installed. The SPP6A will maintain low humidity levels in all storage conditions.The Free Standing collapsible stand allows the equipment to installed in “TentedStorage” of military vehicles. The small compact design make the unit the ideal choicefor installation within most armored vehicles whilst in storage.You can rely on this durableunit to perform faithfully without complicated maintenance or costly downtime.

Proven Performance

For over 40 years EIPL have been a supplier of military gradedehumidifiers and air conditioning to the Military and Rail Industries.Once the SPP6A is positioned inside the storage area, the requiredlevel of humidity can be selected by adjusting the humidity controlknob to the appropriate setting. Operation is then automatic.

The unitis supplied with a monitor box which is positioned on the outside of thedehumidified area. The monitor box incorporates indicator lamps whichshow:
• Power on
• Dehumidified running
• High Humidity Warning Lamp
The monitor box allows the operating status of the dehumidifierto be confirmed without needing to enter the dehumidified area.

The Problem

Excess humidity in your crawl space, warehouse, office factory orshop results in corrosion, mold growth and rotting. Enormous costsare incurred every year through damage to inventory and throughinflated building maintenance costs as a result of dampness.Even if your building seems dry during the day, at night when thetemperature falls the humidity rises and the condensation processbegins. The compact physical size, and high performance, makesthe EIPL SPP6A dehumidifier family the ideal choice for small spaces.

The Dehumidifier

EIPL dehumidifiers are effective solutions to environmental controlproblems. The EIPL range of units are high capacity dehumidifiers,made to operate at high efficiencies by removing moisture fromthe air through the refrigeration process. The fan draws the moistair through the cold evaporator coil, which cools the air below itsdew point. Moisture forms on the evaporator coil and is collected inthe condensate tray, which is equipped with an internal condensatepump for easy removal of collected moisture.

The cooled air then passes through the hot condenser coil whereit is reheated using the same energy removed during the coolingphase, plus the additional heat generated by the compressor. Theair is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered.Continuous circulation of air through the dehumidifier graduallyreduces the relative humidity within the area. Because the CD rangesof units are equipped with an internal humidistat, they automaticallyswitch on and off to save energy and expense by maintaining thedesired level of humidity with intermittent operation.

The additional features of the SPP6A make the unit the ideal choicefor installations where remote monitoring is required. The remoteindicator panel can be mounted outside the equipment beingdried, therefore allowing monitoing, without having to disturb dryingprocess.

Request a quote…

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.